RLXIB-ICN.jpg

802.11n Industrial Client (FCC)

RLXIB-ICN-A

Discontinued: No new product for sale. More Info
Recommended replacements: RLXIB-IHN-A

The 802.11n Industrial Hotspot series provides enterprise-class technology, optimized for rugged industrial performance and easy deployment in the field. These 802.11n Hotspots use multiple-input/multiple-output (MIMO) technology supporting up to 3 antennas.

This allows fast data rates up to 300Mbps with EtherNet/IP Requested Packet Interval (RPI) times as low as 2 ms. The Industrial Client (RLXIB-ICN) provides connectivity to any third-party Access Point. It is also compatible with RadioLinx 802.11a/b/g radios. More than just a new 802.11 technology, the RLXIB-IHN family adds RADIUS security for centralized management of security policies, VLANs for network traffic segmentation, and data prioritization while continuing to include the industrial wireless features that have made previous Industrial Hotspots successful.

特性 优势

Enterprise Class Technology

300 Mbps RF Rates (MIMO)

  • Multicast, I/O & Produce/Consume messaging at packet rates <1ms
  • Video Monitoring & Automation Control Simultaneously

VLAN

  • Separate Automation Networks & LAN Access
  • Allow Mobile Workers access to Network Resources

 Quality of Service

  • Prioritize Control Data, Video & Voice
  • Support for Voice over IP (VoIP) phones

RADIUS Security

  • Centralized Management of Wireless Security Policies

Rugged Industrial Performance

Ease of Deployment

  • Single webpage setup by field personnel
  • WirelessN Discovery Tool - view network topology, assign IP addresses for configuration, monitor network diagnostics, update radio firmware, and detect all 802.11 radios on the network, including third-party wireless devices
  • ProSoft Wireless Designer for planning and specifying wireless networks

Reliable I/O Message Delivery

  • Multicast I/O messages between PLCs transferred using wireless acknowledgements
  • IGMP Snooping & Multicast Filtering enhance reliability

 Industrial Grade

  • Usable in Class I, Division 2 hazardous locations
  • Designed for high vibration environments

-40°C to +75°C Operation

  • Operation in all outdoor conditions
  • Rugged construction withstands all operating environments

规格

Frequency Band

Frequency

Channel

(Varies by country)

2.412 to 2.462 GHz (FCC)2.412 to 2.472 GHz (ETSI)

1-111-13

 

5.150 to 5.250 GHz (FCC/ETSI)5.250 to 5.350 GHz (FCC/ETSI)5.470 to 5.725 GHz (FCC/ETSI)5.725 to 5.850 GHz (FCC)

36 - 4852 - 64100 - 140149 - 165

Standards

802.11n, 802.11a & 802.11g (Legacy)802.11h (DFS), 802.11i (RADIUS), 802.11e (QoS)802.1Q (VLAN), 802.3af (PoE), IGMPv2

Transmit Power (Programmable) *Subject to Regional Regulatory Limits

22 dBm @ MCS0, MCS8 (802.11an/gn)17 dBm @ MCS7, MCS15 (802.11an/gn)22 dBm @ 6 Mbps (802.11a/g)17 dBm @ 54 Mbps (802.11a/g)

 

Antenna Impact: 3 Antennas/ MIMO: Use values above 2 Antennas: Subtract 3 dB from values above1 Antenna: Subtract 5 dB from values above

Channel data rates (802.11n)

MCS0 – MCS15, 1-2 Channels & 1-2 Streams

 

1 Channel

2 Channels

Rate

Streams

 

7 Mbps

15 Mbps

MCS0

1 Stream

 

72 Mbps

150 Mbps

MCS7

 
 

14 Mbps

30 Mbps

MCS8

2 Streams

 

144 Mbps

300 Mbps

MCS15

 

Channel data rates (802.11a/g)

802.11a/g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps

Receiver Sensitivity (Typical)

-92 dBm @ MCS0, MCS8 (802.11an/gn)-70 dBm @ MCS7, MCS15 (802.11an)-74 dBm @ MCS7, MCS15 (802.11gn)-92 dBm @ 6 Mbps (802.11an/gn)-74 dBm @ 54 Mbps (802.11a)-78 dBm @ 54 Mbps (802.11g)

Security

WPA2 Enterprise – 802.11i AES w/ RADIUSWPA2 Personal – 802.11i AES w/ Passphrase Legacy WPA TKIP, WEP support & MAC ID filter

硬件

Enclosure

Extruded aluminum with DIN and panel mount

Size

115 x 117 x 45 mm (W x H x D)4.5 x 4.6 x 1.75 inches

Ethernet Ports

One 10/100 Base-T connector, shielded RJ45IEEE 802.3, 802.3u, 802.3x

Antenna Port

(3) RP-SMA connector

Weight

1.1 lbs (499g)

Operating Temperature

-40° C to +75° C

Humidity

To 90% RH, non-condensing

External PowerPoE Injector

10 to 24 VDC802.3af PoE Powered Device

Average Power

<9W

下载

ProSoft Wireless Designer (PSW-PWD) Datasheet 169.63 kB 最后修改 2013.02.21
RLXIB-ICN Dimension Drawings 132.23 kB 最后修改 2013.02.22
ProSoft Wireless Designer User Manual 1.32 MB 最后修改 2013.02.22
RLXIB-ICN Datasheet 91.97 kB 最后修改 2014.11.08
RLXIB-IHxN MIB 98.06 kB 最后修改 2010.06.07
RLXIB-ICN Setup Guide 712.62 kB 最后修改 2010.03.30
RLXIB-ICN User Manual 2.66 MB 最后修改 2013.07.25
ProSoft Wireless Designer (PSW-PWD) version 4.5.013 6.00 MB 最后修改 2014.05.30
WirelessN Discovery Tool v1.0.530 26.67 MB 最后修改 2013.02.21
RLXIB-IHN/ICN/IH2N(-W) Firmware v1.0.1-37s 7.04 MB 最后修改 2013.06.12

视频

 

证书

EX Certificate (ATEX Directive) 106.84 kB 最后修改 2013.11.11
Australian C-Tick Mark 56.55 kB 最后修改 2012.12.05
Australian C-Tick Mark - Declaration of Conformity 2.34 MB 最后修改 2013.05.28
CB Safety 32.95 kB 最后修改 2012.08.27
CE Mark 93.64 kB 最后修改 2013.03.13
FSB Notification 13.46 MB 最后修改 2012.08.27
GOST-R Declaration of Conformity 6.68 MB 最后修改 2012.12.18
Russian GOST-R 7.07 MB 最后修改 2012.12.18
Russian GOST-R (Mandatory) 11.49 MB 最后修改 2012.12.18
UL/cUL; Class 1, Div 2 637.08 kB 最后修改 2014.09.15
UL/cUL; Class 1, Div 2 (Canada) 673.91 kB 最后修改 2014.09.15