QuickServer Serial Ethernet

EtherNet/IP, BACnet/IP, and BACnet MS/TP QuickServer Gateways

PS-QS-1x10-0780

Active Mature: Product is fully supported, but a newer product or family exists.
For new applications use the PS-QS-2x10-F

The QuickServer line of communication gateways are designed to link building automation driven networks with industrial control networks. The PS-QS-1x10-0780 simultaneously supports EtherNet/IP, BACnet/IP, and BACnet MS/TP, allowing for any combination of protocols to be used. The QuickServer gateways are available with limits of up to 250 or 500 points of application data.

QuickServer is ready to configure for the specific application. All necessary instructions and software are included with QuickServer. If the user prefers the unit to be pre-configured prior to delivery, FieldServer offers a custom configuration service.

特性 优势

  • Ability to interface up to 250 or 500 points of common BAS protocols depending on gateway
  • Multi-configuration capability; specific configurations selectable via DIP switches or software
  • DIN rail mount included with gateway
  • DIP switches to select baud rate or node ID on the fly
  • BACnet COV support for fast data communication while reducing the traffic over a BACnet network. BTL Marked (PS-QS-1X10-XXXX)

规格

Field Connections

  • Ethernet 10/100 RJ45
  • Two Serial RS-485 terminal (up to 115K baud)

硬件

Environment

  • Operating temperature: -40°F to 167°F (-40°C to 75°C)
  • Relative humidity: 5% to 90% RH, with no condensation

Power Requirements

  • 9 to 30 Vdc or Vac or 5 Vdc
  • Current draw 150mA @ 12V

Other

  • Configuration/Diagnostic utilities
  • Capacity: 250 or 500 Points
  • Table, Wall or DIN rail mount

Physical Dimensions (WxDxH)

  • 4.5 x 3.2 x 1.6 in. (11.5 x 8.3 x 4.1 cm)
  • 0.4 lbs (0.2 Kg)

下载

LifeCycle Letter PS-QS-1010-xxxx 334.31 kB 最后修改 2021.02.11
PS-QS-1x10-0780 Datasheet 392.46 kB 最后修改 2020.10.28
QuickServer Setup Guide 2.84 MB 最后修改 2020.07.27
FieldServer Toolbox Setup 12.05 MB 最后修改 2020.07.27
SlotServer/QuickServer - Legacy Configuration & Debug Software (all products) 17.04 MB 最后修改 2015.09.11
Protocol Driver and Configuration Manual PS-QS-1x10-0780 5.80 MB 最后修改 2020.11.03
Sample Configurations 40.96 kB 最后修改 2017.12.22
LifeCycle Letter PS-QS-1510-xxxx 334.32 kB 最后修改 2021.02.11

证书

Declaration of Conformity (RoHS\CE) 426.18 kB 最后修改 2020.12.17
Declaration of REACH Compliance 593.33 kB 最后修改 2020.12.17