# IEC8704S.CFG # # Example file for use with the IEC-870-5-104 Server protocol driver on the # MVI46 platform. # # [Module] Module Name : MVI46-104S Module Type : MVI46-104S [Backplane Configuration] Module Name : MVI46-104S MODULE Failure Flag Count : 0 #Determines if BP failure will cause protocol to be #disabled (0=Ignore, >0 = failure count to disable) Error Offset : 1030 #Location of where to write status data (-1=disable) Initialize Output Data : 0 #0=No, 1=Yes read output values from controller # This is the configuration for the IEC-870-5-104 server port emulated on the # Ethernet port on the module. # [IEC-870-5-104] # Network configuration Use IP List : 0 #Use IP list to validate connection (0=No, 1=Yes) Override StartDT : 1 #Used to ignore STARTDT/STOPDT state (0=No, 1=Yes) Clear queue on close : 0 #Clear the queue when connection closed (0=No, 1=Yes) t1 timeout set value : 15 #timeout of send or test ASDU t2 timeout set value : 10 #timeout of ack when no data (t2