Modbus Slave Network Interface Adapter for FLEX I/O
3170-MBS
The MVI94 Modbus Slave Network Interface Adapter can interface up to 8 Rockwell Automation FLEX and/or Integra I/O modules directly with any Modbus Master.
特性 优势
The 3170-MBS module is simple to use, requiring only the setting of several dip-switch options. The Flex and Integra module data images are pre-mapped into Modbus addresses to simplify reading and writing using standard Modbus commands. Each product is shipped with a User Manual detailing its installation and operation.
应用程序
The 3170-MBS module provides highly configurable Slave capabilities to the Rockwell Automation FLEX and/or Integra platform. The product is frequently used in two general applications, SCADA Slave or as a foreign device interface master. In a SCADA Slave application the module could be used in remote controller racks as is often used in the oil and gas, or wastewater industries.
硬件
| 规格 |
描述 |
| 外形尺寸 |
单插槽，与 1794 背板兼容 |
| 背板电流负载 |
20 mA @ 5 V |
| 外部电源 |
12 Vdc 至 24 Vdc |
| 工作温度 |
0°C 至 55°C (32°F 至 131°F) |
| 存储温度 |
-40°C 至 85°C (-40°F 至 185°F) |
| 抗冲击性 |
工作时 30 g |
| 相对湿度 |
5% 至 95% (无冷凝) |
| LED 指示灯 |
模块状态 |
| 配置串行端口 (PRT1) |
迷你 DIN |
| 应用串行端口 (PRT2) |
迷你 DIN |
| 尺寸 (模块安装在基座中) |
3.7 x 3.7 x 2.7 in (H x W x D) |
下载
| 3170-MBS Datasheet | 187.37 kB | 最后修改 2019.03.06 |
| 3170 MBS User Manual | 1.36 MB | 最后修改 2020.01.21 |
| 3170-MBS Installation Guide | 94.26 kB | 最后修改 2010.04.30 |
| LifeCycle Letter 3170-MBS | 106.11 kB | 最后修改 2024.02.20 |