The A-CFR ControlNet Fiber Repeater extends the length of a network for a point-to-point topology while performing network media conversion from copper to fiber, and from fiber to copper.
The A-CFR can be used when a medium-distance fiber link between two ControlNet products is needed. The fiber link provides isolation between nodes and is less susceptible to a noisy environment than copper media.
Drag with the mouse. Click for close.
|
Drag with the mouse. Click for close.
|
Drag with the mouse. Click for close.
|
| Specification |
Description |
| Connectors |
2 x ST-Type connectors (FO-Tx and FO-Rx) |
| Wavelength |
820 nm |
| Transmission Mode |
Multi-mode |
| Supported Fiber Cables |
OM1: 62.5/125 µm |
| Maximum Distance |
3000 m |
|
Transmit Power (at |
OM1: 62.5/125 µm
OM2: 50/125 µm |
| Optical Budget |
13.0 dB (for OM1 - 62.5/125 µm) |
| Specification |
Description |
| Power Supply |
Input: 10 to 32 VDC, (70 mA @ 24 VDC) |
| Power Consumption |
1.7 W (max) |
| Dimensions (H x W x D) |
148.0 x 34.0 x 116.0 mm |
| Connector |
3-way terminal |
| Conductors |
24 to 18 AWG |
| Enclosure Rating |
IP20, NEMA/UL Open Type |
| Temperature |
0 to 70 °C |
| Earth Connection |
Yes, terminal based |
| Emissions |
IEC 61000-6-4 |
| ESD Immunity |
EN 61000-4-2 |
| Radiated RF Immunity |
IEC 61000-4-3 |
| EFT/B Immunity |
EFT: IEC 61000-4-4 |
| Surge Immunity |
Surge: IEC 61000-4-5 |
| Conducted RF Immunity |
IEC 61000-4-6 |
| ControlNet Fiber Repeater Datasheet | 1.17 MB | 最后修改 2025.02.04 |
| ControlNet Fiber Repeater User Manual | 774.36 kB | 最后修改 2025.02.04 |
| Certification of Quality | 433.25 kB | 最后修改 2025.03.05 |
