-
Solutions
- Amusement
- Automated Material Handling
- 汽车解决方案
- IIoT Solutions
-
PROFIBUS DPV1 PS69 Master Network Interface Module for CompactLogix
PS69-DPM
The PS69 PROFIBUS DP Master module expands the functionality of ’s CompactLogix / MicroLogix family of processors to include PROFIBUS. This module supports both I/O control and messaging, thus integrating DPV0 and DPV1 functionality into CompactLogix / MicroLogix.
The PS69-DPM is a CompactLogix / MicroLogix compatible, PROFIBUS certified module, which enables controllers to communicate with a PROFIBUS network. The configuration and diagnostic of the PROFIBUS system is done via the serial diagnostic interface of the module using the System Configuration tool . The data exchange between controller and module is done via the I/O process data image using CompactLogix / MicroLogix backplane technology.
图像
Click on image(s) to enlarge
特性 优势
PROFIBUS certified
Recognized quality certification mark
FDT configuration software and communication DTM included
Module DTM will configure master module and network slave devices. The DTM can be used in many FDT compatible software containers
Sample ladder program
Simplifies integration for quick and easy project start-up
Supports CIP ladder logic messaging
Request diagnostic, status and slave data based on ladder events. Offer better cyclic data performance
应用程序
Configuration
The configuration and diagnostic of the PROFIBUS system is done via the serial diagnostic interface of the module using the PROSOFT.fdt system configuration software tool. PROSOFT.fdt is FDT style configuration software and a communication DTM is included with the module allowing easy configuration of the PROFIBUS Master and network slave devices.
The master and network configuration are stored in the FLASH memory of the module.
The PS69-DPM interface appears to the Logix Controller as a standard I/O module and can be configured with RSLogix™ 5000 by Rockwell Automation®.
规格
Specification
Description
Slaves
Maximum 125
Input/Output
Maximum 244 Bytes per Slave
Input Data
Maximum 408 Bytes (*)
Acyclic Data
DPV1
Status data
88 Bytes
Output data
Maximum 480 Bytes (*)
Command data
16 Bytes
DPV1 services
Read / Write class 1, Alarm
Services
Global-Control, Slave-Diag, Set-Parameter
Sync, Freeze Command
Supported
Up to 32 PROFIBUS devices can be connected to one bus segment. If several bus segments are linked to each other with repeaters, there can be up to 127 devices on the network.
The maximum length of a bus segment depends on the baud rate used. Only PROFIBUS certified cable, preferably the cable type A, should be used.
Baud rate in kBit/s
Max. Distance
9.6
1,200 m / 4000 ft
19.2
1,200 m / 4000 ft
93.75
1,200 m / 4000 ft
187.5
1,000 m / 3280 ft
500
400 m / 1300 ft
1,500
200 m / 650 ft
3,000
100 m / 325 ft
6,000
100 m / 325 ft
12,000
100 m / 325 ft
Parameter
Value
Impedance
135 to 65 Ohm
Capacity
< 30 pF/m
Loop resistance
110 Ohm/km
Wire gauge
0.64 mm
- Single Slot – 1769 backplane compatible
- The module is recognized as an I/O module and the data exchange between controller and module is done via the I/O data image using CompactLogix / MicroLogix backplane technology.
- Ladder logic is used for data transfer between module and processor. Sample ladder file included.
- Supports CompactLogix processors and MicroLogix 1500 LRP
硬件
Specification
Description
Processor
EC1-160P with integrated ASPC2
PROFIBUS Interface
RS-485, max. 12 Mbps, potential free, according EN 50170
Diagnostic Interface
RS-232, PS/2 Mini-DIN female connector, 9600 Baud, non isolated
Power Supply
260 mA at +5 V ±5 %
Power Supply Distance Rating
6
(no more than 6 modules away from the 1769 power supply)Dimensions
Standard 1769 Single-slot module
Burst
EN 61000-4-4, 2 kV, 5 kHz
Surge
EN 61000-4-5, 2 kV common mode, 1 kV differential mode
ESD
EN 61000-4-2, 4 kV contact, 8 kV air, 4 kV indirect
Radiated/ Conducted Immunity
EN 61000-4-3, 10 V/m, 30 to 1000 MHz, 80% AM, 1 kHz sinewave
EN 61000-4-6, 10 V, 0.15 to 30 MHz
Radiated/ Conducted Emission
EN 55011 Class A
Vibration/Shock
IEC 600068-2-6, 10 to 150 Hz,
± 0.75 mm, ± 1 g, 1 Octave/minIEC 600068-2-27, 15 g, 11 ms
Operating Temp.
32° F to 140° F (0° C to 60° C)
Relative Humidity
5% to 95% (without condensation)
Agency Certification
C-UL certified, UL 508 listed, CE
PROFIBUS conformance
PNO certified
证书
ATEX Letter of Conformity 83.59 kB 最后修改 2022.05.12 CB Safety 347.28 kB 最后修改 2020.02.26 CE Mark 91.88 kB 最后修改 2013.02.22 Country Approval - Eurasian Customs Union Conformity (EAC) (Wired) 1.92 MB 最后修改 2020.07.10 UL/cUL; Class 1, Div 2 1.12 MB 最后修改 2019.02.27 UL/cUL; Class 1, Div 2 (Canada) 1.14 MB 最后修改 2019.02.27 Declaration of Conformity 440.44 kB 最后修改 2020.12.18 Declaration of REACH Compliance 389.02 kB 最后修改 2025.12.15